Title
Oxidation of cyanide in effluents by Caro's Acid
Date Issued
15 March 2013
Access level
metadata only access
Resource Type
journal article
Author(s)
Teixeira L.A.C.
Yokoyama L.
Da Fonseca Araújo F.V.
Sarmiento C.M.
Abstract
Caro's Acid (peroxymonosulphuric acid: H2SO5) is a powerful liquid oxidant made from hydrogen peroxide that has been adopted for the detoxification of effluents containing cyanides in gold extraction plants in recent years. The present work reports the findings of a study on the kinetics of aqueous cyanide oxidation with Caro's Acid. Experiments were conducted in batch mode using synthetic solutions of free cyanide. The experimental methodology employed involved a sequence of two 23 factorial designs using three factors: initial [CN-]: 100-400 mg/L; H 2SO5:CN- molar ratio: 1-1.5-3-4.5; pH: 9-11; each one conducted at one level of Caro's Acid strength which is obtained with the H2SO4:H2O2 molar ratio used in Caro's Acid preparation of 3:1 and 1:1. The objective was the evaluation of the effect of those factors on the reaction kinetics at room temperature. Statistical analysis showed that the three investigated variables were found to be significant, with the variables which affected the most being the initial [CN-] and the H2SO5:CN- molar ratio. The highest reaction rates were obtained for the following conditions: H 2SO5:CN- molar ratio = 4.5:1; pH = 9; and Caro's Acid strength produced from the mixture of 3 mol of H2SO 4 with 1 mol of H2O2. These conditions led to a reduction of [CN-] from an initial value of 400 mg/L to [CN -] = 1.0 mg/L after 10 min of batch reaction time at room temperature. An empirical kinetic model incorporating the weight of the contributions and the interrelation of the relevant process variables has been derived as: -d[CN-]/dt = k [CN-]1.8 [H 2SO5]1.1 [H+]0.06, with k = 3.8 (±2.7) × 10-6 L/mg min, at 25 °C. © 2013 Elsevier Ltd. All rights reserved.
Start page
81
End page
87
Volume
45
Language
English
OCDE Knowledge area
Ingeniería de materiales
Scopus EID
2-s2.0-84874916580
Source
Minerals Engineering
ISSN of the container
08926875
Sponsor(s)
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq). Co-authors JPMA and LY wish to thank the Brazilian National Research Council (CNPq) for their research grants.
Sources of information: Directorio de Producción Científica Scopus