Thin film microcrystalline silicon solar cells were prepared with intrinsic absorber layers by Hot Wire CVD at various silane concentrations and substrate temperatures. Independently from the substrate temperature, a maximum efficiency is observed close to the transition to amorphous growth, i.e. the best cells already show considerable amorphous volume fractions. A detailed analysis of the thickness dependence of the solar cell parameters in the dark and under illumination indicate a high electronic quality of the i-layer material. Solar cells with very high open circuit voltages Voc up to 600mV in combination with fill factors above 70% and high short circuit current densities jsc of 22mA/cm2 were obtained, yielding efficiencies above 9%. The highest efficiency of 9.4% was achieved in solar cells of 1.4μm and 1.8μm thickness. These cells with high Voc have considerable amorphous volume fractions in the i-layer, leading to a reduced absorption in the infrared wavelength region.